Custom layouts, real materials, and a crew that shows up on schedule

Designer Kitchen Remodel Nashville TN Built Around How You Cook

A designer kitchen remodel Nashville TN homeowners actually use starts with the layout, not the paint chip. We plan every cabinet run, appliance drop, and lighting circuit before a single box comes out of the wall, then build it with quartz countertops, shaker cabinets, and soft close hinges that hold up to daily cooking. If your kitchen is stuck in 1998, we can help.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Professional Designer Kitchen Remodel in Nashville
Careful work. Honest options.
About this service

What a Designer Kitchen Remodel Nashville TN Involves

A designer kitchen remodel Nashville TN is a full-scope rebuild of the room's layout, storage, surfaces, and lighting, planned around how you actually cook and entertain. It goes past swapping cabinet doors. We measure the room, map the work triangle between the range, sink, and refrigerator, then spec the cabinet boxes, countertop material, backsplash, and under-cabinet lighting to match. Every electrical circuit gets checked against the NEC, and every wall we open gets inspected for water damage before new material goes in.

Most of the kitchens we walk into in Davidson County share the same problems: outdated kitchen layout, insufficient storage space, and poor kitchen lighting that makes the room feel half its size. Older homes near 12South and Hillsboro Village often have galley footprints that close off the cook from the rest of the house. A custom designed kitchen remodel Nashville Tennessee gives you a chance to fix the flow, not just the finish. We start with a walkthrough and a written scope, so you know what is being torn out and what is going back in.

  • ✓ Storage That Actually Fits
  • ✓ Lighting You Can Cook Under
  • ✓ Surfaces Built for Real Cooking
  • ✓ A Layout That Works With the House
What's included

What Is Included in a Designer Kitchen Remodel

Our standard designer kitchen scope covers the full build: demo, rough-in, drywall, flooring, cabinets, countertops, backsplash, lighting, and trim. Appliance purchase is usually handled by the homeowner, though we coordinate delivery and install. Structural changes, window replacement, and exterior work are quoted separately once we have opened the wall and seen what is there.

✓

Demo and Debris Removal

We tear out the old cabinets, counters, flooring, and backsplash, protect the path to the door, and haul debris daily. Walls get opened where the plan calls for it so framing and plumbing can be inspected before anything is closed back up.

✓

Electrical and Lighting Rough-In

New circuits for the range, dishwasher, disposal, and lighting get run to NEC standards, including dedicated circuits for the microwave and any smart appliances. LED under cabinet lighting and task lighting get their own switches.

✓

Cabinetry and Countertops

We set the cabinet boxes, level them, and template the countertop after installation. Quartz, granite, or butcher block gets fabricated with the undermount sink and faucet cutouts, then installed and sealed.

✓

Flooring and Backsplash

Porcelain tile, luxury vinyl plank, or hardwood goes down over a checked and leveled subfloor. The backsplash goes up after the countertop, with the right grout and sealant for the area behind the range.

✓

Plumbing and Ventilation

Sink, faucet, and disposal get set and tested, and the range hood gets vented to the exterior where the layout allows. We check for leaks and proper airflow before the final walkthrough.

✓

Trim, Paint, and Punch List

Baseboard, casing, and any touch-up paint finish the room. We walk the kitchen with you, mark every item that needs attention, and clear the list before final payment.

How it works

How Our Designer Kitchen Remodel Process Runs

01

Walkthrough and Measure

We spend 60 to 90 minutes in the room measuring walls, checking the electrical panel, and looking for water damage under the sink and behind the backsplash. You get a written scope and a realistic budget range before anyone commits to a design.

02

Design and Selections

We lay out cabinet runs, appliance positions, and lighting, then walk you through material choices. Expect to pick cabinet finish, countertop slab, backsplash tile, and flooring in one or two sessions. Lead times on quartz and cabinetry get confirmed at this stage so the schedule is real.

03

Demo and Rough-In

Tear-out takes two to four days on a typical kitchen. We protect the path to the front door, haul debris daily, and open walls to check framing and plumbing. Electrical, plumbing, and ventilation rough-in get inspected before anything gets closed back up.

04

Install and Finish

Drywall, flooring, cabinets, countertop template, backsplash, and trim go in sequence. Cabinet install runs three to five days, and the countertop fabricator templates after the boxes are set. We keep the jobsite swept and the water on as long as possible so the house stays livable.

05

Punch List and Handoff

We walk the room with you, mark every item that needs attention, and fix it before we call the job done. You get care instructions for the countertop and cabinet finish, plus our workmanship warranty in writing. Final payment is due after the punch list clears, not before.

Tools & methods

Tools and Methods We Use on Every Kitchen

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Table saw and miter saw

Used for cabinet filler strips, trim, and any on-site carpentry. Clean cuts on site mean fewer return trips and a tighter fit at the walls.

Laser level and stud finder

Cabinet runs and backsplash lines get set off a laser level so the room reads straight. The stud finder locates framing before we hang upper cabinets or open a wall.

Router and oscillating multi-tool

The router cuts sink openings and trim profiles, and the multi-tool handles plunge cuts where a saw will not fit, like outlet boxes in a finished cabinet side.

Tile cutter and caulking gun

The tile cutter handles ceramic and porcelain backsplash cuts cleanly. The caulking gun is for the sealant lines at the counter and backsplash that keep water out of the wall.

Cabinet clamps and drywall lift

Clamps hold cabinet boxes tight while the fasteners set, and the drywall lift keeps ceiling patches flat and safe when we close up after rough-in.

Nail gun

Trim, casing, and baseboard go in faster and with a cleaner finish than hand nailing, which matters on the final punch list.

Real results

Before and after.

Galley to Peninsula in 12South

Before

A 1920s bungalow kitchen with a closed galley layout, one ceiling light, and cabinet boxes that had swollen from a slow sink leak. The cook faced a wall while the family ate in the next room.

After

We opened the wall to the dining room with a properly sized header, moved the range to the exterior wall, and built a peninsula with quartz on top. Usable counter went from about 12 linear feet to 22, and the room now seats three at the peninsula.

Water Damage Repair in Green Hills

Before

A failing kitchen faucet had been dripping inside the cabinet for months. The cabinet base was soft, the drywall behind the backsplash showed mold, and the flooring had started to cup near the sink.

After

We replaced the cabinet base, treated and replaced the mold-affected drywall, and installed a new ceramic tile backsplash with sealed grout. The faucet and supply lines were replaced, and the flooring near the sink was patched and leveled.

High End Spec Upgrade in Belle Meade

Before

A 1990s kitchen with builder-grade oak cabinets, laminate counters, and a single overhead light. The homeowners wanted Sub-Zero refrigeration and a Wolf range but the electrical and cabinet runs could not support them.

After

We ran dedicated circuits for the new appliances, adjusted the cabinet runs for panel-ready refrigeration, and installed Caesarstone counters with a farmhouse sink. LED under cabinet lighting went on its own circuit. The kitchen now supports the appliance spec it was missing.

Problems we solve

Kitchen Problems We Fix Before They Get Worse

Most kitchen calls start with one visible problem and end with three hidden ones. These are the issues we find most often when we open up a Nashville kitchen, and what happens if they get left alone.

Ask a pro →
01

Water damaged cabinet boxes under the sink

We pull the cabinet, inspect the wall and subfloor, replace any compromised material, and fix the leak at the source. New cabinet boxes go in with a sealed base and a proper drip edge so the same spot does not fail again.

↗
02

Outdated kitchen layout with a blocked work triangle

We map the work triangle first, then move appliances and cabinets to tighten it. Where walls can come out, we open the room to the adjacent space. The result is a kitchen that cooks faster and shows better.

↗
03

Poor kitchen lighting with shadows on the counter

We add LED under cabinet lighting on a dedicated circuit, plus task lighting over the island or peninsula. Recessed cans get placed to light the work surfaces, not the floor, and the switches go where your hands expect them.

↗
04

Worn out cabinets with failing hinges and drawers

We check the boxes first. If the structure is sound, refacing with new doors and soft close hinges saves money. If the boxes are swollen or delaminated, we replace them with plywood or MDF boxes built for the room.

↗
Proof you can check

Licensed, Insured, and Accountable

✓
Tennessee Home Improvement LicenseTennessee Board for Licensing Contractors
✓
Davidson County Contractor LicenseMetro Nashville Codes Department
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
OSHA 30-Hour Construction SafetyOccupational Safety and Health Administration
✓
NARI Certified RemodelerNational Association of the Remodeling Industry
Good questions

Frequently Asked Questions

(615) 909-7503 →

Most full designer kitchens in Nashville land between $45,000 and $110,000 in 2026, with mid-range builds around $65,000 and high-end jobs with Sub-Zero or Wolf appliances going higher. Layout changes, cabinet grade, and countertop material move the number most. A cosmetic refresh with new doors and counters can come in under $30,000.

The right remodeler is the one who shows you a written scope, a real schedule, and a crew that has pulled permits in Davidson County before. Ask for the license, the insurance certificate, and two recent kitchens you can walk through. We will hand over all three before you sign anything.

You need design work, not necessarily a separate designer. On a straight cabinet swap, our team can lay out the room. On an open-plan change or a galley that needs reworking, an NKBA Certified Kitchen Designer earns their fee by catching layout problems before demo. We will tell you which side of that line your project falls on.

Plan on six to ten weeks from demo to final punch list for a full kitchen. Cabinet lead times run three to six weeks, and countertop fabrication adds two to three weeks after template. Small kitchens move faster, and a job with structural changes or a full rewire adds time. We give you the sequence in writing before demo day.

Ready when you are

Get Your Designer Kitchen Remodel Nashville TN Walkthrough

We will walk your kitchen, measure the room, and give you a written scope with a realistic budget range before you commit to anything. Call (615) 909-7503 and we will schedule the visit within a week.

Schedule My Walkthrough (615) 909-7503 →
Request an appointment

Call our Nashville kitchen remodeler

Call (615) 909-7503 or email info@mendarotech.com and we will set up a walkthrough. We answer the phone during business hours and keep the 24/7 line open for emergencies. Most estimates get scheduled within a few business days, and we give you a written number before any work starts.

Call anytime(615) 909-7503Email the officeinfo@mendarotech.shop
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call(615) 909-7503