Licensed, insured, and code-correct from demo to final caulk line

Local Kitchen Remodeler in Nashville for Kitchens That Work

A Local Kitchen Remodeler in Nashville rebuilds the room you use most, and we do it with a written scope, a real schedule, and crews who show up when they say they will. Whether you're in a 1920s bungalow in East Nashville or a new build in The Nations, we handle cabinets, countertops, tile, lighting, and plumbing so you're not juggling five subs. Call (615) 909-7503 for a free estimate.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Local Kitchen Remodeler you can count on
Careful work. Honest options.
About this service

What a Local Kitchen Remodeler in Nashville Actually Does

A Local Kitchen Remodeler in Nashville is a licensed remodeling contractor that tears out and rebuilds the working core of your kitchen: cabinets, countertops, backsplash, flooring, lighting, sink and faucet, ventilation, and the electrical and plumbing that feed them. We pull the Davidson County permits, coordinate the trades, and hand you a finished room that passes inspection. Most full kitchens we build run 5 to 9 weeks on site, depending on cabinet lead times and whether we're moving walls or gas lines.

Nashville kitchens take a beating. Humidity swings from July through September warp MDF cabinet boxes, and older homes in 12South and Hillsboro Village often hide water damage behind the backsplash from a slow faucet leak. If you've been searching for a local kitchen remodeler near me in Nashville TN and getting nothing but call centers, that's the gap we fill: one crew, one point of contact, and a schedule you can plan your life around.

  • ✓ One Crew, One Schedule
  • ✓ Code-Correct Electrical and Plumbing
  • ✓ Materials That Survive Tennessee Humidity
  • ✓ Storage You Can Actually Use
What's included

What's Included in a Full Kitchen Remodel

Every full kitchen we build includes the items below. Add-ons like wall removal, appliance upgrades, and custom cabinetry are priced separately and listed in your estimate so there's no ambiguity about what you're paying for.

✓

Demo and Debris Removal

We tear out old cabinets, counters, flooring, and backsplash, protect the floors and adjacent rooms with dust barriers, and haul everything away. Demo runs 1 to 3 days depending on the size of the kitchen and whether we're removing tile.

✓

Permits and Inspections

We pull the Davidson County permits for electrical, plumbing, and structural work, schedule the rough-in and final inspections, and hand you the signed-off paperwork at the end. You don't call the county; we do.

✓

Cabinet Installation

We set and level base and wall cabinets, install soft close hinges and drawer slides, and shim to the wall so the reveals are even. Shaker cabinets, flat panel, and custom built-ins are all in scope. Cabinet boxes are leveled to within 1/16 inch.

✓

Countertop Template and Install

We template after cabinets are set, fabricate the slab, and install with a sealed seam. Quartz, granite, marble, butcher block, and solid surface are all available. Undermount and farmhouse sinks get cut and mounted during this stage.

✓

Tile, Flooring, and Lighting

Backsplash tile, porcelain tile or luxury vinyl plank flooring, and LED under cabinet lighting are all installed as part of the finish stage. We check for mold behind the backsplash before covering it and level uneven subfloors before flooring goes down.

✓

Final Walkthrough and Warranty

We test every outlet, run the disposal and faucet, check the range hood draw, and walk the punch list with you. You get a 1-year workmanship warranty and the manufacturer paperwork for cabinets, counters, and appliances.

How it works

How Our Kitchen Remodel Process Runs

01

On-Site Walkthrough

We measure the room, check the panel, trace the plumbing, and look for water damage behind the backsplash. This takes 60 to 90 minutes. You get a written scope and a realistic budget range within 3 business days, not a ballpark over the phone.

02

Design and Selections

You pick cabinets, counters, tile, and fixtures with our guidance on what holds up in Nashville. We help you choose between quartz and granite countertops, shaker cabinets versus flat panel, and farmhouse sinks versus undermount. Allow 1 to 2 weeks for selections and cabinet ordering.

03

Permits and Demo

We pull the Davidson County permits and schedule inspections. Demo runs 1 to 3 days. Floors are protected, dust barriers go up, and debris leaves the same week. If we find mold behind the backsplash or a water damaged cabinet box, we show you photos before we touch it.

04

Rough-In and Build

Electrical, plumbing, and ventilation get roughed in and inspected first. Then cabinets set, countertops template and install, tile goes up, and flooring goes down. This is the longest stretch, usually 3 to 5 weeks, and you'll get a weekly update every Friday.

05

Final Walkthrough

We test every outlet, run the disposal and faucet, check the range hood draw, and walk the punch list with you. You get warranty paperwork and care instructions for your counters and cabinets. Final payment is due after the punch list is complete, not before.

Tools & methods

Tools and Methods We Use on Every Kitchen

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Table saw and miter saw

Precision cuts on cabinet filler, trim, and flooring. A sharp blade and a squared fence are the difference between a tight joint and a caulk line covering a gap.

Laser level and stud finder

Cabinet runs get set level to within 1/16 inch across the wall. The laser catches the high spot before the cabinets go up, not after.

Tile cutter and oscillating multi-tool

Clean cuts on porcelain and ceramic tile, and precise notching around outlets and cabinet edges without cracking the tile.

Drywall lift

Ceiling patches and new soffits get hung safely and evenly. It keeps the drywall from cracking during install, which saves a call-back.

Cabinet clamps and caulking gun

Cabinet boxes get clamped and screwed tight so the seams stay closed. The caulking gun is for the final seal at the counter-to-backsplash joint, which is where water gets in.

Nail gun and router

Trim, crown, and toe kick get installed fast and tight. The router cuts the sink opening and edge profiles on butcher block countertops.

Jigsaw

Cutouts for the sink, cooktop, and outlet boxes in the countertop and cabinet sides. A fine-tooth blade keeps the cut clean on finished surfaces.

Real results

Before and after.

Galley Kitchen Storage Doubled in The Nations

Before

An 8x10 galley kitchen with original 1980s oak cabinets, one shelf per cabinet, and a counter so cluttered there was no prep space. The range hood recirculated and grease had built up on the upper cabinets.

After

Full-height shaker cabinets with pull-out pantries and drawer dividers, quartz countertops, a subway tile backsplash, and a vented range hood. Usable storage went up roughly 35 percent, and the counters stayed clear.

Water Damage Rebuilt in a Donelson Ranch

Before

A slow leak under the sink had rotted the cabinet base and stained the toe kick. The faucet dripped, the disposal was seized, and mold was starting behind the backsplash tile.

After

New plywood base cabinet, a Delta faucet, a new 3/4-horsepower disposal, and a rebuilt backsplash with new ceramic tile. The cavity was dried and treated before rebuild, and the leak was traced to a failed supply line.

Open Concept Conversion in Green Hills

Before

A closed-off 1990s kitchen with a wall separating it from the living room. Dark cabinets, a peninsula that blocked traffic flow, and one ceiling fixture for the whole room.

After

The wall came down with an engineered beam and a permit. New island with a Cambria quartz top, Wolf range, Sub-Zero refrigerator, LED under cabinet lighting, and porcelain tile flooring. The room gained about 120 square feet of usable space.

Problems we solve

Kitchen Problems We Fix for Nashville Homeowners

Most kitchen remodels start with a problem, not a Pinterest board. Here are the ones we see most often in Davidson County homes, and how we solve them.

Ask a pro →
01

Outdated kitchen layout with a blocked work triangle

We redraw the work triangle so the sink, range, and fridge sit within 9 feet of each other with clear door swings. If a wall has to move, we confirm load-bearing status and engineer the beam. Most layout fixes add 2 to 3 weeks to the schedule.

↗
02

Water damaged cabinet boxes under the sink

We pull the base cabinet, dry and treat the area, and replace the damaged box with plywood construction instead of particleboard. We also replace the failing kitchen faucet and check the supply lines while the cabinet is out.

↗
03

Insufficient storage space in a galley kitchen

We take cabinets to the ceiling, add pull-out pantries and drawer dividers, and install LED under cabinet lighting so the space is usable. A typical galley kitchen gains 30 to 40 percent more usable storage without adding square footage.

↗
04

Poor kitchen lighting and a range hood that doesn't vent

We add dedicated circuits for task lighting, install LED under cabinet lighting on a dimmer, and vent the range hood to the exterior through the shortest run possible. Proper ventilation also cuts down on grease buildup on your new cabinets.

↗
Proof you can check

Licensed, Insured, and Accountable

✓
Tennessee Home Improvement LicenseTennessee Board for Licensing Contractors
✓
Davidson County Contractor LicenseDavidson County
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
NARI Certified RemodelerNational Association of the Remodeling Industry
✓
NKBA Certified Kitchen DesignerNational Kitchen & Bath Association
Good questions

Kitchen Remodeling Questions Nashville Homeowners Ask

(615) 909-7503 →

The best local kitchen remodeler in Nashville TN is the one who pulls permits, shows you a written scope, and finishes on schedule. Ask for the Tennessee Home Improvement License, proof of insurance, and two recent Davidson County jobs you can drive past. We'll give you all of it before you sign anything, plus a free on-site estimate at (615) 909-7503.

Typical 2026 pricing in Nashville runs $22,000 to $75,000 for a full kitchen, with most jobs landing around $38,000. A cosmetic refresh with new counters and a backsplash can start near $12,000. Cabinet grade, countertop material, and whether we move plumbing drive most of the difference. We give you a line-item estimate, not a lump sum.

Start with the license. Tennessee requires a Home Improvement License for jobs over $3,000, and Davidson County requires a contractor license for permitted work. Then check insurance, ask for a written scope, and confirm who pulls the permit. A contractor who hesitates on any of those three questions is one to skip. We'll email ours before the first visit.

Yes, and we cover the whole county. We work in 37206, 37203, 37027, 37138, 37076, and 37072, plus Brentwood, Green Hills, Donelson, and Hermitage. If you're in Davidson County or the surrounding neighborhoods, we'll come measure and give you a free estimate. Call (615) 909-7503 and we'll confirm your address is in our service area.

Ready when you are

Get a Free Estimate From a Local Kitchen Remodeler in Nashville

We'll walk your kitchen, measure the room, and hand you a written scope with a real budget range within 3 business days. Licensed, insured, and permitted through Davidson County. Call (615) 909-7503 or request an estimate online.

Request Free Estimate (615) 909-7503 →
Request an appointment

Call our Nashville kitchen remodeler

Call (615) 909-7503 or email info@mendarotech.com and we will set up a walkthrough. We answer the phone during business hours and keep the 24/7 line open for emergencies. Most estimates get scheduled within a few business days, and we give you a written number before any work starts.

Call anytime(615) 909-7503Email the officeinfo@mendarotech.shop
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call(615) 909-7503